![]() |
Features: - Pure sine wave inverter - High-frequency transformer inside - Surge capacity for inductive loads - Built-in advanced DSP-controlled MPPT solar charge controller and configurable AC/Solar input priority via LCD setting - Compatible to grid voltage or generator power - Selectable input voltage range for home appliances and personal computers - Smart battery charger design for optimized battery performance - Overload, short-circuit, over temperature, low/high voltage protection Technical data: | ||||||
Model |
TI0824-IHWM |
TI1048-IHWM |
TI1624-IHWM |
TI2424-IHWM |
TI3248-IHWM |
TI4048-IHWM |
Rated Power |
800W |
1000W |
1600W |
2400W |
3200W |
4000W |
Input | ||||||
Nominal Input Voltage |
230VAC, 50Hz/60Hz(auto detection) | |||||
Selectable Voltage Range |
170-280VAC (for personal computers); 90-280VAC (for home appliances) | |||||
Max AC Input |
300VAC | |||||
Transfer Time |
10ms typical (UPS); 20ms typical (appliances) | |||||
Output | ||||||
AC Voltage Regulation |
230VAC ± 5% (battery mode) | |||||
Voltage Waveform |
pure sine wave | |||||
Peak Efficiency |
90% - 93% |
93% | ||||
Overload Protection |
5s@≥150% load; 10s@110%~150% load | |||||
Surge Capacity |
2 x rated power for 5s | |||||
Battery | ||||||
Battery Voltage |
24VDC |
48VDC |
24VDC |
24VDC |
48VDC | |
Max AC Charge Current |
20A |
15A |
30A |
30A |
60A | |
Solar Charger (MPPT) | ||||||
Max PV Array Power |
600W |
900W |
600W |
600W |
3000W | |
Max Solar Charge Current |
25A |
18A |
25A |
25A |
60A | |
Max PV Voltage (Voc) |
75 VDC |
102 VDC |
75 VDC |
75 VDC |
145VDC | |
Max Charge Current |
25A |
18A |
30A |
30A |
120A | |
AC charger and solar charger can’t work at the same time. | ||||||
Maximum Efficiency |
98% | |||||
Standby Power Consumption |
2 W | |||||
Safety Certification |
CE (EN62040-1) | |||||
Operating Environment |
0°C to 55°C, 5% to 95% relative humidity (non-condensing) | |||||
Dimension (D*W*H) |
100*272*355mm |
120*295*468mm | ||||
Net Weight |
6.8kg |
7.0kg |
7.4kg |
11kg |